62
Snapshot Tutorial
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. In the REC mode, set the mode dial to [h] (HDR).
2. Press the shutter button to shoot.
NOTE
• HDR works best when shooting with the camera mounted on a tripod.
• Shooting with this function causes the flash setting to change automatically to
?
(Flash Off).
• Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this function may not be
able to produce the desired result.
This feature applies HDR (High Dynamic Range, page 62) photography to transform
snapshots and movies into works of art that provide a greater degree of expression
than conventional imaging. You can also adjust the intensity of the art effect that is
applied (page 89).
1. In the REC mode, set the mode dial to [a] (HDR Art).
2. Press [SET] and then use [8] and [2] to select the second control
panel option from the top (Art Effect).
• You also can select the Art Effect item by simply pressing [2].
Digitally Correcting for Overexposure and Underexposure
(HDR)
Shooting Snapshots Digitally Processed for Artistic Effect
(HDR Art)
Normal image HDR Art image
To Next Page
Loading...
Need help?
General
Weight and Dimensions
