91
Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
• You also can use the Control Panel (page 39) to configure some of the settings that
appear on the menu screen. Refer to the page references provided in this section
for information about configuring settings using the Control Panel.
. Example Menu Screen Operation
1. In the REC mode, press [MENU].
This will display the menu screen.
• Menu contents are different in the REC
mode and PLAY mode.
2. Use [4] and [6] to select the tab where
the menu item you want to configure is
located.
3. Use [8] and [2] to select the menu item
you want, and then press [6].
4. Use [8] and [2] to change the setting of
the selected menu item.
5. After the setting is the way you want,
press [SET] to apply the setting and
return to the viewfinder screen.
• Pressing [4] registers the selected setting
and returns to the menu.
• To configure settings on another tab after
pressing [4] to return to the menu item
selection, use [8] to move the highlighting
up to the tabs, and then use [4] and [6] to
select the tab you want.
• Pressing [MENU] interrupts the menu operation and exits the menu screen.
IMPORTANT!
• Switching from “Auto” to “Premium Auto PRO” (page 29) will make some menu
items unavailable.
Using On-screen Menus
[MENU]
[SET]
[8] [2] [4] [6]
Items
Example:
When “Self-timer” is
selected on the “REC” tab
Tabs
To Next Page
Loading...
Need help?
General
Weight and Dimensions
