Casio I/O-PB-11 User Manual

General.
Gulde
Caring
for the
Printer
Stamp
lnk
Replenishment
Replacing
the Ink
Ribbon
Cassette
Printing
of
dates, unit
prices,
and
amounts
is performed
using
the
printer
ink
ribbon
cassette.
A
stamp
pad
is used
for printing
of
the store
name,
etc.
Printing
can
be kept
clear
by
replacing
the
ink
ribbon cassette
when
necessary
and
by adding
one
or
two
drops
of ink
to the stamp
pad.
Open
the
printer cover
using
the
printer
cover
key, and
proceed
as
noted below
1.
Tear the
receipt
PaPer
between
the
paper
roll and
paper
inlet.
2. Remove
stamp
pad
from
its holder
by
lifting at
the
tab.
3.
Feed
one or
two drops
of
ink
into the
holes on
the back
of
the stamp
pad
(Fig.
7-1)
Be sure
to use
only
CASIO
SUPER
INK
K. Chemical
reaction
caused
by
using
other
types
of
ink can
damage
the stamp
pad.
4. Replace
the stamp
pad in
its
holder
5.
Feed
the
paper through
the
printer.
1.
Remove
printer
sub-cover.
2. Remove
used
ink
ribbon
cassette
from
its
holder by
pulling
toward
the
keyboard
(Fig.
7-3).
3.
Position the
new
ink
ribbon cassette
so
that
its projections
are aligned
with the
holes
of
the base
plate and
press toward
the printer
until
it
locks.
Use only
ERC-32C
ribbon
cassettes.
Ottrer
types
of
cassettes
can
damage
the printer.
4. Tighten
the
ink
ribbon by
turning
knob on
the cassette
two
or three
turns.
Fig 7-3.
o
Never
attempt
to replenish
the
ribbon
using stamp
ink.
Doing
so can
damage
the printer.
o
After
completing
these
procedures,
replace
the receipt
paper.
Fig 7-1.
Fig
7-2
123

Casio I/O-PB-11 Specifications

General

Brand	Casio
Model	I/O-PB-11
Category	Cash Register
Language	English