E-15
To use the cash register’s basic function
Installing paper roll
You can use the paper roll as receipts or journals (for business records). By default, your cash register is
set as receipt printing. Please see pages E-18 and E-19 if you wish to use the paper roll for journals.
The setting methods of the paper roll dier by the usage. Please follow the instructions below in accor-
dance with your usage of the paper roll.
Caution (in handling the thermal paper)
• Never touch the printer head and the platen.
• Unpack the thermal paper just before your use.
• Avoid heat and direct sunlight.
• Avoid dusty and humid places for storage.
• Do not scratch the paper.
• Do not keep the printed paper under the following circumstances:
• High humidity and temperature/direct sunlight/contact with glue, thinner or a rubber eraser.
To install receipt paper
1 Remove the printer cover.
2 Open the platen arm by lifting it up.
3 Ensuring the paper is being fed from the bottom of the roll, lower the roll
into the space behind the printer.
4 Put the leading end of the paper over the printer.
5 Close the platen arm slowly until it locks securely. Please push the
position marked [PUSH HERE].
6 Replace the printer cover, passing the leading end of the paper through
the cutter slot. Tear o the excess paper.
To Next Page
Loading...
Need help?
General
