Casio XJ-A256 Function Guide

12
Wireless is one of the projector’s built-in applications. It makes it possible to establish a wireless LAN
connection between the projector and a computer, and project the computer’s display contents.
To perform wireless projection
Press the [INPUT] key and select “Wireless” as the input source. This will enable wireless projection.
The Wireless standby screen will be projected if there is no wireless LAN connection between the
projector and a computer.
Wireless Standby Screen
The Wireless standby screen displays the information described below.
For information about the meaning of SSID, IP address, and other terms used above, see “System
Admin Page Settings” (page 36).
About the Projector’s Wireless Application
Display Item Description
LOGIN CODE This is a four-digit number that must be input when establishing a wireless LAN
connection between the projector and a computer under default Wireless settings.
The number is updated to new one whenever the projector is started up.
SSID Projector’s current SSID.
Server IP Projector’s current IP address.
Channel Projector’s current channel number.
Security Projector’s current security setting.

Casio XJ-A256 Specifications

General

Matrix size	0.65 \
Number of colors	16.78 million colors
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	18 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±30 °
Aspect ratio	16:10
RS-232 ports	1
Offset	84 %
Throw ratio	1.15 - 2.3:1
Optical zoom	2 x
Zoom capability	Yes
Focal length range	- mm
Service life of light source	20000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1280 x 800 (WXGA)
RMS rated power	1 W
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g
Noise level	35 dB
Noise level (economic mode)	29 dB
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, ITA, JPN, KOR, SWE
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	110 W
Power consumption (typical)	210 W
Power consumption (PowerSave)	0.4 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, Composite, VGA

Weight and Dimensions

Depth	210 mm
Width	297 mm
Height	43 mm
Weight	2300 g