Casio XJ-A256 Function Guide

40
4. Click the [Login] button.
z This logs in to the System Admin page and displays the Status screen. From here, perform the
procedure under “To configure security settings” (page 21), starting from step 2.
Note
z You can perform simultaneous projection over a wireless LAN connection of terminals with
MobiShow installed and computers with Wireless Connection 3 installed. Use the procedure
under “Establishing a Wireless LAN Connection after Configuring Security Settings” (page 23)
to establish a wireless LAN connection between a computer and the Projector. When
establishing a connection, input the passphrase for the projector’s SSID.
z You can use the EZ-Converter FA software that comes with the projector to convert
PowerPoint files to PtG files that can be played back using MobiShow. Also, you can play PtG
files using the projector’s Viewer function. For more information, see the USB Function Guide
on the CD-ROM that comes with the projector.
Confirmed MobiShow Platforms
Visit the CASIO projector support page at:
http://www.casio.com/support/
You can project the screen contents of a computer running Mac OS (Mac OS X 10.5 or higher) that is
connected to the Projector over a wireless LAN connection. The following conditions are required in
order to do so.
z The SSID of the Projector must be changed to any one of the following: casiolpj_mobishow1,
casiolpj_mobishow2, or casiolpj_mobishow3. See “To switch between Default SSIDs” on page 30
for information about how to change the SSID.
z Install wePresent* on the Mac OS computer, start it up, and then log in to the Projector from
wePresent.
* You can download wePresent from the CASIO Projector Support Site located at the URL shown
below. The CASIO Projector Support Site also includes important information about the required
computer environment and operation details.
http://www.casio.com/support/
Wireless Projection from Mac OS

Casio XJ-A256 Specifications

General

Matrix size	0.65 \
Number of colors	16.78 million colors
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	18 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±30 °
Aspect ratio	16:10
RS-232 ports	1
Offset	84 %
Throw ratio	1.15 - 2.3:1
Optical zoom	2 x
Zoom capability	Yes
Focal length range	- mm
Service life of light source	20000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1280 x 800 (WXGA)
RMS rated power	1 W
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g
Noise level	35 dB
Noise level (economic mode)	29 dB
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, ITA, JPN, KOR, SWE
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	110 W
Power consumption (typical)	210 W
Power consumption (PowerSave)	0.4 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, Composite, VGA

Weight and Dimensions

Depth	210 mm
Width	297 mm
Height	43 mm
Weight	2300 g