Casio XJ-A256 Function Guide

30
Configuring Wireless Settings
You can use the projector’s setup menu to configure the Wireless function settings described below.
Note
More advanced projector wireless LAN connection settings (connection setup, security settings,
etc.) can be configured using the System Admin page, which can be accessed from the
computer currently connected to the projector via wireless LAN. For more information, see
“System Admin Page Operations and Settings” (page 32).
To switch between Default SSIDs
Important!
This procedure can be used only to change from one default SSID to another default SSID. If the
current SSID or the SSID being changed to is not one of the six default SSIDs, use the
projector’s System Admin page to change the SSID. For details, see “To configure projector
network settings and wireless LAN connection settings” (page 34).
1. While the Wireless screen is being projected, press the [MENU] key.
2. Use the [
T
] key to move the highlighting to “Wireless” and then press the
[ENTER] key.
3. Use the [
T
] key to move the highlighting to “Change wireless connection” and
then press the [ENTER] key.
z This displays a dialog box like the one shown below for changing the wireless connection.
z Each of the connection names that appear on the dialog box corresponds to an SSID as
shown below.
z For details about MobiShow connection, see “Projecting from a Terminal with MobiShow
Installed” (page 39).
Setting Name Description
Change wireless connection Switches the projector’s SSID setting from one of the six default SSIDs to another.
Initialize Wireless Setup Returns all Wireless settings to their initial factory defaults.
Connection Name SSID
Wireless Connection 1 casiolpj_default1
Wireless Connection 2 casiolpj_default2
Wireless Connection 3 casiolpj_default3
MobiShow Connection 1 casiolpj_mobishow1
MobiShow Connection 2 casiolpj_mobishow2
MobiShow Connection 3 casiolpj_mobishow3

Casio XJ-A256 Specifications

General

Matrix size	0.65 \
Number of colors	16.78 million colors
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Screen size compatibility	18 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±30 °
Aspect ratio	16:10
RS-232 ports	1
Offset	84 %
Throw ratio	1.15 - 2.3:1
Optical zoom	2 x
Zoom capability	Yes
Focal length range	- mm
Service life of light source	20000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1280 x 800 (WXGA)
RMS rated power	1 W
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g
Noise level	35 dB
Noise level (economic mode)	29 dB
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, ITA, JPN, KOR, SWE
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	110 W
Power consumption (typical)	210 W
Power consumption (PowerSave)	0.4 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, Composite, VGA

Weight and Dimensions

Depth	210 mm
Width	297 mm
Height	43 mm
Weight	2300 g