Heater and Air Conditioning Control
System
(If
Equipped)
Fan Knob
The knob on the left side of the heating system control
panel controls the fan speed. The knob has four speed
positions.
To
increase airflow, move the knob toward
HI.
To decrease airflow, move
it
toward
LO.
To turn the
fan off, move the knob to OFF.
If
you have the air
conditioner on, moving the fan knob to OFF also turns
off the
A/C
compressor.
In OFF, while driving, ram airflow will vent to the floor
outlets. The mode knob will not redirect ram airflow to
other selected outlet positions. This is normal operation
for the OFF position.
Temperature
Knob
The middle knob on the control panel lets
you
select the
relative temperature
of
the air flowing into the passenger
area
of
your vehicle. This knob will allow you to adjust
the relative air temperature independently
of
the function
knob setting. Move the
knob
clockwise toward the red
area for warmer air. Move the knob counterclockwise
toward
the
blue area for cooler air.
Mode
Knob
The right knob on the control panel allows you to
choose the direction
of
air delivery. The control knob
can be placed in any position betweeri any two mode
settings
to
blend the flow
of
air.
#
VENT
This setting directs air through the
instrument panel outlets.
+’
VENTBEAT
Use this setting to divide airflow
between the floor outlets and instrument panel outlets.
+’
HEATER:
This setting directs air through the
+e
+e
e
floor outlets.
+’
DEFOG:
This setting directs air
to
the heater
outlets and toward the windshield.
w.
DEFROST
This setting directs air toward
the windshield.
3-3
To Next Page
Loading...
Need help?
General
