3.
Squeeze the tab on the
side of the lamp socket
while turning the socket
to the left.
4.
Pull the socket out
of
the lamp assembly.
5.
Push in gently on the bulb, turn it to the left and
remove it from the socket.
6.
Put the new bulb into the socket, gently press in on
the bulb and turn
it
to the right until it
is
tight.
7.
Put the socket back into the lamp assembly and turn
it
to
the right until it locks.
8.
Put
the parkingkurn signal lamp assembly back into
the vehicle and tighten the screws.
Front Parkinnrn Signal Lamps with
Composite Headlamps
2.
Squeeze the tab on the side of the lamp socket while
turning the socket to the left.
To Next Page
Loading...
Need help?
General
