To use the rear control, first turn the front control knob
to REAR CNTL. Then, the rear control can be used to
increase and decrease the airflow.
Rear Heater (Without Rear Air Conditioning)
(If
Equipped)
If
you
have a rear
heater (without rear air
conditioning), the control
switch
is
located on the
instrument panel.
To increase and decrease the flow of heated air to the
rear floor vents, move the switch marked REAR HEAT
to the blower speed
you
want.
The knob has three speed positions. To increase the
flow
of
heated air, move the switch toward HIGH. To
decrease the flow of heated air, move it toward
LOW.
To
turn the fan off, move the switch
to
OFF.
3-5