Chevrolet 1997 Tahoe User Manual

Rear Lamps
1. Open the tailgate or rear doors.
2. Remove the two black plastic plugs from the rear
lamp assembly access holes.
3. Remove the two rear
lamp assembly screws
inside the fender and
pull out the lamp
5.
6.
7.
8.
9.
4.
Remove the screws from
the bulb retainer and
take the bulb retainer off
of the lamp assembly.
Pull the
old bulb straight out of the socket.
Put in a new bulb and push it in until it
is tight.
Replace the bulb retainer.
Replace the rear lamp assembly and tighten the
screws. You may want to use a magnetic screwdriver
when installing the screws.
Close the tailgate or rear doors.
6-43

Chevrolet 1997 Tahoe Specifications

General

Brand	Chevrolet
Model	1997 Tahoe
Category	Automobile
Language	English