Vehicle Personalization
Memory
Seat
If
your vehicle has this
feature, then the controls
for the memory function
are located
on
the
driver’s door.
These buttons are used to program and recall memory
settings for the driver’s seat, throttle and brake
pedals, both the driver’s and passenger’s outside mirror,
and the radio station presets. The settings for these
features can be personalized for both driver 1 and
driver
2.
Driver 1 or driver 2 corresponds to the memory
buttons labeled land
2
on the driver’s door.
To store your memory seat, throttle and brake pedals,
mirrors and radio presets, do the following:
1. Adjust the driver’s seat (including the seatback
recliner, lumbar, and side wing area), throttle
and brake pedals, both of the outside mirrors, and
the radio station presets to your preference.
2. Press and hold the 1 or 2 (for driver lor 2) button
of the memory control for three seconds.
A
double
chime will sound to let you know that the position
has been stored.
To repeat the procedure for a second driver, follow the
preceding steps, but press the other numbered
memory control button.
2-61
To Next Page
Loading...
Need help?
General
