Exterior
Lamps
The control on the driver’s side of your instrument panel
operates the exterior lamps.
Turn the control clockwise to operate the lamps.
The exterior lamp control has four positions:
0
(Off):
Turning the control to this position turns
off
the Daytime Running Lamps (DRL) and the automatic
headlamps. An indicator light will illuminate when
selected.
AUTO (Automatic): Turning the control to this position
puts the system into automatic headlamp mode. An
indicator light will illuminate when this position is
selected.
too:
(Parking Lamps): Turning the control
to
this
position turns on the parking lamps, together with the
following:
0
Sidemarker Lamps
Taillamps
License Plate Lamps
Instrument Panel Lights
Roof Marker Lamps (If Equipped)
50
(Headlamps): Turning the control to this position
turns on the headlamps, together with the previously
listed lamps and lights.
You
can switch your headlamps from high to low-beam
by pushing the turn signaVhigh-beam lever towards
the instrument panel.
A circuit breaker protects your headlamps. If you have
an electrical overload, your headlamps will flicker on and
off.
Have your headlamp wiring checked right away
if
this happens.
3-1
3
To Next Page
Loading...
Need help?
General
