500-9030v3.3
Welcome Alarm Status Admin
Reference
35
System Configuration Aspects:
Programmed Entry and Exit Delays:
Entry Delay:_______ Exit Delay:_______
Misc Topics:
Yes No
Duress PIN entry supported
Entry Delay in Stay
Arm to Stay on Fail to Exit
Terminate Exit Delay
Alarm on Fail to Exit
Emergency Keys that are Available:
Yes No
Fire
Police
Emergency (non medical)
Function Key Reference
The Function key (
ƒ
) is pressed and held in
conjunction with the number keys for
customized functions.
Note:
Function keys are not active until configured
by a service technician.
Function keys 1 – 5 can be used by anyone.
Function keys 6, 7, 8, 9 and 0 may require a
user (with function key authority) to be logged
into the keypad. (This is configurable on an
area-by-area basis.)
Function key Assignments:
ƒ
+ 1 =
_________________________
ƒ
+ 2 =
_________________________
ƒ
+ 3 =
_________________________
ƒ
+ 4 =
_________________________
ƒ
+ 5 =
_________________________
(also turns "chime" on and off)
ƒ
+ 6 =
_________________________
ƒ
+ 7 =
_________________________
ƒ
+ 8 =
_________________________
ƒ
+ 9 =
_________________________
ƒ
+ 0 =
_________________________
Chime:
Pressing
ƒ
and
5
simultaneously always
toggles the "Chime" feature on and off, and this
function key sequence can also be programmed for
an additional function if desired.
The "Chime" feature pertains to LCD keypads
emitting tones when a perimeter door is opened
(while the area is armed to "Stay")--to alert the
person(s) inside that someone has entered.
To Next Page
Loading...
Need help?
General
