36 MONITOR AFx™ v3.3 LCD Keypad User's Guide
500-9030v3.3
Schedules for User Access and System Automation
About Schedules
Schedules are customizable time-windows that can:
•
Allow areas to 'open' (disarm), and 'close' (arm)
automatically;
•
Set times when authorized entrants will be able to enter
assigned areas;
•
Allow doors to unlock and relock automatically.
For each schedule, the focus is on the separate time-
intervals to be used throughout the workweek, and the days
that each one applies. Each interval generally pertains to
any unique time-span within the schedule to be applied
throughout the workweek as needed. Each schedule can
contain up to
6
unique time intervals to be applied to any or
all weekdays as necessary.
Up to
50
schedules can be
defined as necessary.
Once defined, schedules can be
assigned to areas, readers/doors,
and user authority levels. This is
done when the system is being
set up.
A '24 hr' schedule is not needed
('24 hr' can be selected directly
instead of assigning a schedule).
Different schedules can be set to
take effect on holidays. This will
typically involve schedules that
are reserved for use with
holidays.
(Information on holidays appears
in a following section.)
Tip:
Photocopy the tables on the following pages as necessary
for your defined number of schedules.
Schedule Int Start Stop Sun Mon Tue Wed Thu Fri Sat
__ _________
1
2
3
4
5
6
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
Schedule for
type 1 Holidays: ______
Schedule for
type 2 Holidays: ______
Schedule for
type 3 Holidays: ______
Schedule Int Start Stop Sun Mon Tue Wed Thu Fri Sat
__ _________
1
2
3
4
5
6
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
Schedule for
type 1 Holidays: ______
Schedule for
type 2 Holidays: ______
Schedule for
type 3 Holidays: ______
To Next Page
Loading...
Need help?
General
