9-33
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
Chapter 9 Configuring Switch-Based Authentication
Configuring the Switch for Secure Shell
Configuring the Switch for Secure Shell
This section describes how to configure the Secure Shell (SSH) feature. SSH is a cryptographic security
feature that is subject to export restrictions. To use this feature, the cryptographic (encrypted) enhanced
software image (EI) must be installed on your switch. You must obtain authorization to use this feature
and to download the cryptographic software files from Cisco.com. For more information, refer to the
release notes for this release.
This section contains this information:
• Understanding SSH, page 9-33
• Configuring SSH, page 9-34
• Displaying the SSH Configuration and Status, page 9-37
For SSH configuration examples, refer to the “SSH Configuration Examples” section in the
“Configuring Secure Shell” chapter of the Cisco IOS Security Configuration Guide, Cisco IOS
Release 12.2, at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_c/fothersf/
scfssh.htm
Note For complete syntax and usage information for the commands used in this section, refer to the command
reference for this release and the command reference for Cisco IOS Release 12.2 at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/index.htm.
Understanding SSH
SSH is a protocol that provides a secure, remote connection to a device. SSH provides more security for
remote connections than Telnet does by providing strong encryption when a device is authenticated. This
software release supports SSH version 1 (SSHv1) and SSH version 2 (SSHv2).
This section consists of these topics:
• SSH Servers, Integrated Clients, and Supported Versions, page 9-33
• Limitations, page 9-34
SSH Servers, Integrated Clients, and Supported Versions
The SSH feature has an SSH server and an SSH integrated client, which are applications that run on the
switch. You can use an SSH client to connect to a switch running the SSH server. The SSH server works
with the SSH client supported in this release and with non-Cisco SSH clients. The SSH client also works
with the SSH server supported in this release and with non-Cisco SSH servers.
The switch supports an SSHv1 or an SSHv2 server.
The switch supports an SSHv1 client.
SSH supports the Data Encryption Standard (DES) encryption algorithm, the Triple DES (3DES)
encryption algorithm, and password-based user authentication.
To Next Page
Loading...
Need help?
General