CHAPTER
26-1
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
26
Configuring RMON
This chapter describes how to configure Remote Network Monitoring (RMON) on your Catalyst 2950
or Catalyst 2955 switch. RMON is a standard monitoring specification that defines a set of statistics and
functions that can be exchanged between RMON-compliant console systems and network probes.
RMON provides you with comprehensive network-fault diagnosis, planning, and performance-tuning
information.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Configuration Fundamentals Command Reference for Cisco IOS Release 12.1.
This chapter consists of these sections:
• Understanding RMON, page 26-1
• Configuring RMON, page 26-2
• Displaying RMON Status, page 26-6
Understanding RMON
RMON is an Internet Engineering Task Force (IETF) standard monitoring specification that allows
various network agents and console systems to exchange network monitoring data. You can use the
RMON feature with the Simple Network Management Protocol (SNMP) agent in the switch to monitor
all the traffic flowing among switches on all connected LAN segments.
To Next Page
Loading...
Need help?
General