Procedure
Step 1 Select Voice > User.
The user can select User Login > Voice > User.
Step 2 In the Supplementary Services section, choose Voicemail, Missed Call in the Handset LED Alert field.
Step 3 Click Submit All Changes.
Enable Do Not Disturb
You can allow persons to turn the Do not disturb feature on or off. The caller receives a message that the
person is unavailable. A person can press the Ignore softkey on the phone to divert an incoming call to another
destination.
If the feature is enabled for the phone, users can turn the feature on or off with the DND softkey.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 92.
Procedure
Step 1 Choose Voice > User.
Step 2 In the Supplementary Services area, select Yes in the DND Setting drop-down list.
Step 3 Click Submit All Changes.
When you select a line (multiline phone), a Do Not Disturb banner displays at the top of the phone screen.
What to do next
Change another setting to ensure that multiline phones correctly display the Do not disturb (currently, a steady,
green color) status for each selected or unselected line. See DND and Call Forwarding Status Sync, on page
192.
Users can enable or turn off the DND feature for each phone line if you configure star codes for DND. See
Configure Star Codes for DND, on page 133.
Related Topics
DND and Call Forwarding Status Sync, on page 192
Enable Feature Key Sync, on page 193
Enable DND Status Sync via XSI Service, on page 194
Configure Star Codes for DND
You can configure star codes that a user dials to turn on or off the do not disturb (DND) feature on a phone.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
133
Phone Administration
Enable Do Not Disturb
To Next Page
Loading...
Need help?
General
