Available Phone StatusDefinitionKey LabelKeyword
Idle, Connected,
Conferencing, Hold
Trigger traceTracetrace
IdleDenotes that a user who is logged in to
an ACD server has set his status as
unavailable.
Unavailunavail
Idle, Off-Hook, Connected,
Shared-Active
Resumes a parked call.Unparkunpark
Connected, Start-Xfer,
Start-Conf
Performs a call transfer. Requires that
Attn Xfer Serv is enabled and there is at
least one connected call and one idle
call.
Transferxfer
ConnectedTransfers an active line on the phone to
a called number. Requires that Attn Xfer
Serv is enabled and there are two or
more calls that are active or on hold.
Xfer linexferlx
Configure Provisioning Authority
You can set up provisioning authority so that users can access their personalized phone settings from other
phones. For example, people who work different shifts or who work at different desks during the week can
share an extension, yet have their own personalized settings.
The Sign in softkey appears on the phone when you enable provisioning authority on the phone. Users enter
their usernames and passwords to access their personal phone settings. Users can also ignore the sign-in and
use the phone as a guest. After users sign in, they have access to their personal directory numbers on the
phone. When the user signs out, the phone reverts to a basic profile with limited features.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 92.
Procedure
Step 1 Select Voice > Provisioning.
Step 2 In the Configuration Profile section, set the Profile Rule field to the phone configuration file's URL.
Example:
http://192.0.2.1:80/dms/CP-MMxx-MPP/MMxxSystem.xml
where,
MM– Cisco IP Phone MM Series with Multiplatform Firmware (68, 78, or 88)
MMxx– Cisco specific phone model (for example, 7841,7861, 8845, 8865 or 7832)
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
174
Phone Administration
Configure Provisioning Authority
To Next Page
Loading...
Need help?
General
