• To enter letters by using the keypad, use a corresponding number key. Press the key one or more times
to display a particular letter. For example, press the 2 key once for “a,” twice quickly for “b,” and three
times quickly for “c.” After you pause, the cursor automatically advances to allow you to enter the next
letter.
• Press the softkey if you make a mistake. This softkey deletes the character to the left of the cursor.
• Press Back before pressing Set to discard any changes that you made.
• To enter a period (for example, in an IP address), press * on the keypad.
The Cisco IP Phone provides several methods to reset or restore option settings, if necessary.
Note
Wi-Fi Settings
Wi-Fi settings are available only on Cisco IP phone 6861 Multiplatform Phones.
You can customize Wi-Fi settings for your phone from the Wi-Fi configuration menu under the Network
configuration menu on the phone. Some of the Wi-Fi settings are also available on the phone web page.
Turn the Wi-Fi On or Off from Your phone
You can enable or disable the wireless LAN of your phone from the Wi-Fi configuration menu.
Procedure
Step 1 Press Applications .
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi .
Step 3 Press the Select button, to turn the Wi-Fi on or off.
Step 4 Press Set to save the changes.
Turn the Wi-Fi On or Off from the Phone Web Page
You can enable or disable the wireless LAN of your phone from the phone web page. You turn on the Wi-Fi
so that the phone connects to a wireless network automatically or manually.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 92.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
45
Phone Installation
Wi-Fi Settings
To Next Page
Loading...
Need help?
General
