Cisco 7912G User Manual

Chapter 2 Customizing Phone Settings
Adjusting the Volume for the Handset, Speaker, and Ringer
2-2
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
78-15080-02
Adjusting the Handset Volume
You can adjust the volume of the call when using the handset.
To adjust the volume on the handset, press the up or down Volume button when
the handset is in use.
If you want to save the handset volume setting, press the Save softkey.
Note If you press the Volume button when not on a call, you adjust the ringer volume.
For details, see the “Adjusting the Ringer Volume” section on page 2-2.
Adjusting the Speaker Volume
To adjust the speaker volume, press the up or down Volume button when the
speaker is in use.
If you want to save the speaker volume setting, press the Save softkey.
Note If you press the Volume button when not on a call, you adjust the ringer volume.
For details, see the “Adjusting the Ringer Volume” section on page 2-2.
Adjusting the Ringer Volume
To adjust the ringer volume, follow these steps:
Note The handset must be in the cradle when adjusting the ringer volume.
Step 1 Press the up or down Volume button to the desired ringer volume. With each
adjustment, a short ringer burst is played.
The ringer volume is automatically saved until the phone is reset. If you want the
ringer volume to be saved even after the phone is reset, continue with these steps:
Step 2 Press the Menu button.
Step 3 Use the Navigation button to select Settings, and then press the Select softkey.

Cisco 7912G Specifications

General

Brand	Cisco
Model	7912G
Category	IP Phone
Language	English