3-11
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
78-15080-02
Chapter 3 Placing a Call and Other Basic Phone Tasks
Setting Up Speed Dial
Procedure
Step 1 From the User Options web page, click Forward all calls to a different number.
The Forward Your Calls page appears.
Step 2 Clear the checkbox next to the line for which you want to cancel call forwarding.
Step 3 Click Update.
Setting Up Speed Dial
You can set up to four speed dial buttons on your Cisco IP Phone 7905G and
7912G. You make these settings using the Cisco CallManager User Options web
pages.
Before You Begin
Log in to the User Options web page. For information on the User Options web
page and how to access it, see the “Logging In to the User Options Web Pages”
section on page 1-14.
Procedure
Step 1 From the User Options web page, click Add/update your Speed Dials.
The Add/Update your Speed Dials page appears.
Step 2 In the Speed Dial 1 field, enter the phone number for the first speed dial number.
Enter the number exactly as you would if you were to call that number. For
example, enter an access code such as 9 or the area code, if necessary.
Step 3 In the Display Text field next to the Speed Dial 1 field, enter a name or description
that your phone will display for the first speed dial number.
Step 4 Repeat Steps 2 and 3, if desired, to set up additional speed dial numbers.
Step 5 Click Update.
To Next Page
Loading...
Need help?
General
