Cisco 7912G User Manual

3-3
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
78-15080-02
Chapter 3 Placing a Call and Other Basic Phone Tasks
Making Telephone Calls
Answering a Call
To answer an incoming call, lift the handset.
Using Call Waiting
If your system administrator has enabled call waiting for your phone and you are
on a call, you will hear a call waiting tone and see caller ID information on the
phone’s LCD screen if a new call comes in.
To answer the new call, press the Answer softkey. When you do so, the original
call is put on hold.
Redial the most recently
dialed number
Press the Redial softkey
Use speed dial numbers Perform any of these actions:
• With the phone on hook, press the Menu
button, select Directories > Speed Dial,
select the number to call, and then lift the
handset or press the Dial softkey
• Lift the handset, press the Menu button, select
Directories > Speed Dial, select the number
to call, and then press the Dial softkey
• With the phone on hook, press the Navigation
button to select the number to call and then lift
the handset or press the Dial softkey
• Lift the handset, press the Navigation button
to select the number to call, and then press the
Dial softkey
For instructions on setting up speed dial numbers,
see the “Setting Up Speed Dial” section on
page 3-11
Table 3-1 Placing a Call (continued)
If you want to... Then...

Cisco 7912G Specifications

General

Brand	Cisco
Model	7912G
Category	IP Phone
Language	English