1-2
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 1 Overview
Hardware Models and Supported Regulatory Domains
Hardware Models and Supported Regulatory Domains
The 1570 series access points have model numbers in the format AIR-AP157wxyy-zzK9, where:
• wx indicates the number of radios and the type of antennas. The options are:
–
2I—indicating two radios (4x4:3 5 GHz and 4x4:3 2.4 GHz) with internal antennas.
–
2E—indicating two radios (4x4:3 5 GHz and 4x4:3 2.4 GHz) with external antennas.
• yy indicates whether the access point is AC powered or is the cable modem type (all cable modem
versions are powered by Power-over-cable). Internal antenna models can be powered only by
Power-over-cable. External antenna models can be either AC powered, PoE or powered by
Power-over-cable. The options are:
–
C1—Indicates Power-over-cable with North American domain (N4) cable modem supporting
5-42/ 54-1000 MHz Diplex Filter, and 8x4 or 16x4 channel bonding options.
–
C2— Indicates Power-over-cable with North American domain (N8) cable modem supporting
5-85/108-1002 MHz Diplex Filter, and 8x4 or 16x8 or 24x8 channel bonding options.
–
C3—Indicates Power-over-cable with European domain (E8) cable modem supporting
5-65/108-1002 MHz Diplex Filter, and 8x4 or 16x4 or 24x8 channel bonding options.
–
C4—Indicates Power-over-cable with Japanese domain (J8) cable modem supporting
5-65/108-1002 MHz Diplex Filter, and 8x4 or 16x4 or 24x8 channel bonding options.
–
AC— indicates AC power supply, applicable only to external antenna models.
• zz indicates the regulatory domain. The supported regulatory domains are:
–
A-, B-, C-, D-, E-, F-, H-, K-, M-, N-, Q-, R-, S-, T-, Z-
Click this URL to browse to a list of countries and regulatory domains supported by the 1570:
www.cisco.com/go/aironet/compliance
To Next Page
Loading...
Need help?
General
