Cisco ASR 1000 Series Configuration Guide

Example: WCCPv2—IPv6—Cisco ASR 1000 Platform Specific Configuration
The following example shows how to display platform-specific configuration and IPv6 counters information
related to WCCP on a Cisco ASR 1000 Series Aggregation Services Router:
Device# show platform software wccp service-number ipv6 counters
Service Group (1, 61, 0) counters
Unassigned count = 0
Dropped due to closed service count = 0
Bypass count = 0
Bypass failed count = 0
Denied count = 0
Redirect count = 4
CE = 2001:1:100::105, obj_id = 213, Redirect Packets = 4
The following example shows how to display platform-specific configuration and route processor slot
information related to WCCP on a Cisco ASR 1000 Series Aggregation Services Router:
Device# show platform software wccp rp active service-number ipv6
IPV6 Dynamic service 61
Priority: 34, Number of clients: 1
Assign Method: Hash, Fwd Method: GRE, Ret Method: GRE
L4 proto: 6, Use Source Port: No
Is closed: No
The following example shows how to display platform-specific configuration and embedded service processor
slot information related to WCCP on a Cisco ASR 1000 Series Aggregation Services Router:
Device# show platform software wccp fp active service-number ipv6
IPV6 Dynamic service 61
Priority: 34, Number of clients: 1
Assign Method: Hash, Fwd Method: GRE, Ret Method: GRE
Is closed: No
Current ACE: 0, Pending ACE: 0
New ACE: 0, New ACE completed: No
ACL id: 0
AOM id: 0x18a, status: created
The following example shows how to display the WCCP service group information in the active Cisco Quantum
Flow Processor (QFP) on a Cisco ASR 1000 Series Aggregation Services Router:
Device# show platform hardware qfp active feature wccp service id service-id ipv6
Service ID: 61
Service Type: 1
Service Priority: 34
Assign Method: 1
Hash key: 0x51
Hash buckets ppe address: 0x8bceb600
Mode: Open
State: Active
Number of Caches in this service: 1
ce index: 0
cache_id : 11
Cache ip addr : 0x20010001
Cache cfg ppe addr : 0x8bcab200
Cache oce ppe addr : 0x891a7670
Cache state ppe addr : 0x8bcfd288
Number of interfaces using this service: 1
Interface: GigabitEthernet0/0/0.1
cpp-if-h: 12
Dir: 0
pal-if-h: 15
uidb sb ppe addr: 0x8bd308e0
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
115
WCCPv2—IPv6 Support
Example: WCCPv2—IPv6—Cisco ASR 1000 Platform Specific Configuration

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English