Cisco ASR 1000 Series Configuration Guide

The following example shows how to enable IP accounting with the ability to identify IP traffic that fails IP
access lists and with the number of transit records that will be stored in the IP accounting database limited to
100:
Router# configure terminal
Router(config)# ip accounting-transits 100
Router(config)# interface ethernet 0/5
Router(config-if)# ip accounting output-packets
Router(config-if)# ip accounting access-violations
Additional References
Related Documents
Document TitleRelated Topic
Cisco IOS Master Commands List, All Releases
Cisco IOS commands
Cisco IOS IP Application Services Command
Reference
IP application services commands
Standards and RFCs
TitleStandard
ICMP Router Discovery Messages
RFC 1256
Technical Assistance
LinkDescription
http://www.cisco.com/cisco/web/support/index.html
The Cisco Support and Documentation website
provides online resources to download documentation,
software, and tools. Use these resources to install and
configure the software and to troubleshoot and resolve
technical issues with Cisco products and technologies.
Access to most tools on the Cisco Support and
Documentation website requires a Cisco.com user ID
and password.
Feature Information for IP Services
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
19
Configuring IP Services
Additional References

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English