Cisco ASR 1000 Series Configuration Guide

SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip accounting-threshold threshold
4.
ip accounting-list ip-address wildcard
5.
ip accounting-transits count
6.
interface type number
7.
ip accounting [access-violations] [output-packets]
8.
ip accounting mac-address {input | output}
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Router> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
(Optional) Sets the maximum number of accounting entries
to be created.
ip accounting-threshold threshold
Example:
Router(config)# ip accounting-threshold 500
Step 3
(Optional) Filters accounting information for hosts.
ip accounting-list ip-address wildcard
Example:
Router(config)# ip accounting-list 192.31.0.0
0.0.255.255
Step 4
(Optional) Controls the number of transit records that will be
stored in the IP accounting database.
ip accounting-transits count
Example:
Router(config)# ip accounting-transits 100
Step 5
Specifies the interface and enters interface configuration mode.
interface type number
Example:
Router(config)# interface GigabitEthernet
1/0/0
Step 6
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
11
Configuring IP Services
Configuring IP Accounting

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English