Example: Setting a Password for a Router and Content Engines 77
Example: Configuring a Web Cache Service 77
Example: Running a Reverse Proxy Service 77
Example: Registering a Router to a Multicast Address 77
Example: Using Access Lists 78
Example: WCCP Outbound ACL Check Configuration 78
Example: Verifying WCCP Settings 79
Example: Enabling WCCP Interoperability with NAT 80
Additional References 80
Feature Information for WCCP 82
CHAPTER 4
WCCPv2—IPv6 Support 89
Finding Feature Information 89
Prerequisites for WCCPv2—IPv6 Support 90
Restrictions for WCCPv2—IPv6 Support 90
Information About WCCPv2—IPv6 Support 90
WCCP Overview 90
Layer 2 Forwarding Redirection and Return 91
WCCP Mask Assignment 91
WCCP Hash Assignment 92
WCCPv2 Configuration 93
WCCPv2 Support for Services Other Than HTTP 94
WCCPv2 Support for Multiple Routers 94
WCCPv2 MD5 Security 94
WCCPv2 Web Cache Packet Return 94
WCCPv2 Load Distribution 95
WCCP VRF Support 95
IPv6 WCCP VRF Tunnel Interface 95
WCCP Bypass Packets 98
WCCP Closed Services and Open Services 98
WCCP Outbound ACL Check 98
WCCP Service Groups 98
WCCP—Check All Services 99
WCCP—Configurable Router ID Overview 100
WCCP Troubleshooting Tips 100
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
vi
Contents