Name: Cisco ASR 1000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

14-51

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers

Removing and Replacing Cisco ASR 1000 Series Router SPAs and SPA Interface Processors

Removing and Replacing Cisco ASR 1000 Series Router SPAs

and SPA Interface Processors

This section contains the following topics:

• Electrostatic Discharge Prevention, page 14-51

• Removing the Cisco ASR 1000 SPA Interface Processor, page 14-53

• Replacing the Cisco ASR 1000 SPA Interface Processor, page 14-53

• Removing a Shared Port Adapter from a SIP, page 14-54

• Replacing a Shared Port Adapter in a SIP, page 14-54

Note For detailed information about SIP and SPA software commands such as activating and deactivating

SIPs, prepare for online insertion and removal of SPAs, and activate and deactivate configuration

examples, see Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation

Guide.

Note The embedded shared port adapter interface processor (SIP) on the Cisco ASR 1002 Router and Cisco

ASR 1002-F Router do not support online insertion and removal. However, the SPAs on the Cisco

embedded services processors do support online insertion and removal.

Caution When removing or replacing SPAs, make certain that all the screw fasteners on each card and each SIP

are screwed in tightly to prevent accidental removal of another card. Each SIP has two screw fasteners

per slot and each SPA has two screw fasteners.

We suggest you have the following tools and parts readily available for installation of the SIPs and SPAs:

• Number 2 Phillips or a 3/16-inch flat-blade screwdriver

• Shared port adapter interface processor (SIP)

• Shared port adapters (SPAs)

• Cables

• Your own ESD-prevention equipment or the disposable grounding wrist strap included with all

upgrade kits, field-replaceable units (FRUs), and spares

• Antistatic mat or surface, or static shielding bag

If you need additional equipment, contact a service representative for ordering information.

Electrostatic Discharge Prevention

Electrostatic discharge (ESD) damages equipment and impairs electrical circuitry. ESD occurs when

printed circuit boards are improperly handled and results in complete or intermittent failures.

Cisco ASR 1000 Series Hardware Installation Guide

Other manuals for Cisco ASR 1000 Series