Cisco ASR 1000 Series Hardware Installation Guide

A-6
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Appendix A Cisco ASR 1000 Series Router Specifications
Cisco ASR 1004 Router Specifications
Cisco ASR 1004 Router Memory and Storage Options
Table A-10 lists the hardware memory and storage options supported on the Cisco ASR 1004 Router.
Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1004 Router has RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port
supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with
10BASET, 100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45
connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially. See
Figure A-1 to see an RJ-45 port and connector.
Cisco ASR 1004 Router MGMT Ethernet Port Signals and Pinouts
Table A-11 lists the RJ-45 port pinouts for the front panel Management Ethernet port.
Storage temperature
• –38° to 150° F
• –40° to 70° C
Power consumption
• Maximum DC: 1020W
• Maximum AC: 960W
• Maximum (Out): 765W
Table A-9 Cisco ASR 1004 Router Specifications (continued)
Description Specification
Table A-10 Memory and Storage Options for Cisco ASR 1004 Router
Memory Type Default Maximum System Support
RP1 2 GB DRAM 4 GBDRAM
eUSB 1 GB (Partitioned: 2x32MB for
NVRAM and the remaining for
mass storage
For mass storage: hard disk drive 40 GB or solid-state
drive 32Gb support
Table A-11 RJ-45 Management Ethernet Port Pinouts for the Cisco ASR 1004 Router
Pin Signal Direction Description
1 TX Data+ Output Transmit Data
2 TX Data– Output Transmit Data
3 RX Data+ Input Receive Data
4, 5 NC — —
6 RX Data– Input Receive Data
7,8 NC — —

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English