106
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-28417-02
Chapter Configuring Additional Router Features
Configuration Limiting
Video Monitoring Limits
Table 20 summarizes the maximum values for video monitoring configuration, monitored flows, and
their performance metrics.
Note For more information about each category, see the “Implementing Video Monitoring Service on Cisco
ASR 9000 Series Routers” chapter in Cisco ASR 9000 Series Aggregation Services Router IP Addresses
and Services Configuration Guide.
Ta b l e 20 Video Monitoring Limits
Category Maximum Value Comments
Class Maps 1024 per policy map
1024 per system
The maximum value is valid when the
keyword is traffic.
Policy Maps 256 per system The maximum value is valid when the
keyword is performance-traffic.
Video Monitoring service
policies
One policy per interface The maximum values is valid when the
keyword is performance-traffic.
Monitored Flows 4096 per Network Processor (NP)
4096 per class map
4096 per policy map (8192 per policy map
when attached to a bundle interface.)
Includes both static and dynamic flows.
Flow Rate at Layer 3 280 kpps per flow Equivalent to uncompressed high definition
(HD) video streams. The absolute
configuration maximum value is 1 Mpps per
flow.
Flow Rate at Media Layer 3 Gbps per flow Equivalent to uncompressed high definition
(HD) video streams.
Delay Factor (DF) Precision 1 millisecond —
Media Rate Variation (MRV)
range
999.999% Minimum range is -100%
Flow History 60 intervals per flow Default value is 10 intervals per flow.
Interval Duration 300 seconds per interval Default value is 30 seconds per interval.
Minimum value is 10 seconds that can be
incremented by 5 seconds.
Reacts 14 reacts per class map
Note This value is specific to Cisco ASR
9000 Series Aggregation Series
Router running Cisco IOS XR
Software Release 4.0.