Cisco ASR-920-4SZ-D User Manual

Monitoring the REP Configuration
SUMMARY STEPS
1.
enable
2.
show interface [interface-id] rep [detail]
3.
show rep topology [segment segment-id] [archive] [detail]
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Router> enable
•
Enter your password if prompted.
(Optional) Displays the REP configuration and status for a specified
interface.
show interface [interface-id] rep [detail]
Example:
Router# show interface gigabitethernet0/1
rep detail
Step 2
•
Enter the physical interface or port channel ID, and the optional
detail keyword, if desired.
(Optional) Displays REP topology information for a segment or for
all segments, including the primary and secondary edge ports in the
segment.
show rep topology [segment segment-id]
[archive] [detail]
Example:
Router# show rep topology
Step 3
•
Enter the optional keywords and arguments, as desired.
Configuring REP Configurable Timers
Before You Begin
For the REP operation, you must enable REP on each segment interface.
LAN Switching Configuration Guide Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
27
Configuring Resilient Ethernet Protocol
Monitoring the REP Configuration

Cisco ASR-920-4SZ-D Specifications

General

Brand	Cisco
Model	ASR-920-4SZ-D
Category	Network Router
Language	English