Configuring and Accessing the Web User Interface
Web User Interface Overview
2
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
The Cisco ASR 1000 Series Routers can be accessed using a web user interface. This web user interface
allows users to monitor router performance using an easy-to-read graphical interface. Most aspects of a
Cisco ASR 1000 Series Router can be monitored using the web user interface.
The web user interface has the following features:
• An interface that presents information in an easy-to-read graphical format.
• An interface that allows users to monitor most software processes, including processes related to the
IOS and nonIOS subpackages within the Cisco IOS XE consolidated package.
• An interface that allows users to monitor most hardware components, including all RPs, ESPs, SIPs,
and SPAs installed in the router.
• Access to the legacy web user interface in addition to the enhanced web user interface.
• The ability to gather the output of show commands from the web user interface.
Legacy Web User Interface Overview
Previous Cisco routers have a legacy web user interface that can be used to monitor the router. This
legacy web user interface presents information in a straightforward manner without using any graphics.
On the Cisco ASR 1000 Series Routers, this interface is part of the larger web user interface and can be
accessed by clicking the “IOS Web UI” option in the left-hand menu.
On the Cisco ASR 1000 Series Routers, the legacy web user interface can only be used to configure and
monitor the IO
S subpackage. In some scenarios, most notably when an ip http command has been
successfully entered to enable the HTTP or HTTPS server while a properly configured web user interface
transport map has not yet been applied on the Cisco ASR 1000 Series Router, the legacy web user
interface will be accessible while the graphics-based web user interface will be inaccessible.
To Next Page
Loading...
Need help?
General
