D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
106
Cisco TelePresence System Quick Set C20 and Profiles using C20 Administrator Guide
Setting the menu password from the web
interface
1. Sign in to the web interface with your user name and
current password.
2. Go to Configuration > System Configuration.
3. Click Set/Change Administrator Settings menu password
to open the menu password dialog.
4. Enter the password in the input field.
5. Click Save to set/change the password.
To find the system’s IP address tap Settings (
)
> System Information on the Touch controller, or
navigate to Home > Settings > System Information
using the remote control and on-screen menu.
Setting the menu password using the remote
control
1. In the on screen menu, go to Home > Settings >
Administrator settings > Set menu password.
The password format is a string with 0–255 characters.
To deactivate the password leave the password input
field empty.
2. Enter the menu password in the input field. The password
you enter is hidden; each character is replaced with a star
(*).
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/
ABC/123.
3. Select Save to save the changes, or Cancel to leave
without saving.
4. Press Home (
) to exit.
Setting the menu password
When starting up the video conference system for the first
time anyone can access the Administrator Settings menu with
either the remote control or the Touch controller because the
menu password is not set.
We strongly recommend that you set a menu
password, because the administrator settings may
severely affect the behavior of the system.
You should use the web interface or remote control to set the
menu password; the Touch controller cannot be used.
To Next Page
Loading...
Need help?
General
