D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
18
Cisco TelePresence System Quick Set C20 and Profiles using C20 Administrator Guide
Navigate to: Call Control > Call Control
Controlling the camera
You can control the camera using the Call Control page.
Click the Camera Control button to open the window where
you can pan, tilt and zoom the camera, and apply camera
presets.
Camera presets
If a camera preset is
defined it is listed here.
Apply the preset by clicking
its name.
Pan and tilt
Use the left and right
arrows to pan the camera,
and the up and down
arrows to tilt it.
Zoom
Use + and - to zoom
in and out.
Choose which camera to control
Click the arrow to open the
drop-down list. Then choose the
camera you want to control.