D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
11
Cisco TelePresence System Quick Set C20 and Profiles using C20 Administrator Guide
1. Connect to the video system
Open a web browser and enter the IP address of
the video system in the address bar.
To find the IP address (IPv4 orIPv6), tap
Settings (
) on a Touch controller;
or navigate to Home > Settings >
System information when using a remote
control and the on-screen menu.
2. Sign in
Enter the user name and password for your video
system and click Sign In.
The system is delivered with a default user
named admin with no password (i.e. leave the
Password field blank when signing in for the first
time).
We strongly recommend that you set a
password for the admin user, see the next page.
Signing out
Hover the mouse
over your user
name and choose
Sign out from the
drop-down list.
Starting the web interface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In this chapter you will find information how to use the web
interface for system configuration and maintenance.
We recommend that you use the latest release of one of the
major web browser.
To Next Page
Loading...
Need help?
General
