Cisco c240 User Manual

A-2
Cisco UCS C240 M4 Server Installation and Service Guide
OL-32474-01
Appendix A Server Specifications
Power Specifications
Power Specifications
The power specifications for the four power supply options are listed in the following sections:
• 650 W AC Power Supply, page A-2
• 1200 W AC Power Supply, page A-3
• 1400 W AC Power Supply, page A-3
• 930 W DC Power Supply, page A-4
You can get more specific power information for your exact server configuration by using the Cisco UCS
Power Calculator:
http://ucspowercalc.cisco.com
650 W AC Power Supply
Table A-2 lists the specifications for each 650 W AC power supply
(Cisco part number UCSC-PSU2V2-650W=).
Table A-2 Power Supply Specifications
Description Specification
AC input voltage Nominal range: 100–120 VAC, 200–240 VAC
(Range: 90–132 VAC, 180–264 VAC)
AC input frequency Nominal range: 50 to 60Hz
(Range: 47–63 Hz)
Maximum AC input current 7.6 A at 100 VAC
3.65 A at 208 VAC
Maximum input volt-amperes 760 VA at 100 VAC
Maximum output power per PSU 650 W
Maximum inrush current 35 A (sub-cycle duration)
Maximum hold-up time 12 ms at 650 W
Power supply output voltage 12 VDC
Power supply standby voltage 3.3 VDC
Efficiency rating Climate Savers Platinum Efficiency (80Plus Platinum certified)
Form factor RSP1
Input connector IEC320 C14

Cisco c240 Specifications

General

Brand	Cisco
Model	c240
Category	Server
Language	English