CHAPTER
3-1
Cisco UCS C240 M4 Server Installation and Service Guide
OL-32474-01
3
Maintaining the Server
This chapter describes how to diagnose server system problems using LEDs. It also provides information
about how to install or replace hardware components, and it includes the following sections:
• Server Monitoring and Management Tools, page 3-1
• Status LEDs and Buttons, page 3-2
• Preparing for Server Component Installation, page 3-9
• Installing or Replacing Server Components, page 3-13
• Service DIP Switches, page 3-74
Server Monitoring and Management Tools
Cisco Integrated Management Interface
You can monitor the server inventory, health, and system event logs by using the built-in Cisco Integrated
Management Controller (Cisco IMC) GUI or CLI interfaces. See the user documentation for your
firmware release at the following URL:
http://www.cisco.com/en/US/products/ps10739/products_installation_and_configuration_guides_list.html
Server Configuration Utility
Cisco has also developed the Cisco Server Configuration Utility for C-Series servers, which can aid and
simplify the following tasks:
• Monitoring server inventory and health
• Diagnosing common server problems with diagnostic tools and logs
• Setting the BIOS booting order
• Configuring some RAID configurations
• Installing operating systems
You can also download the ISO image from Cisco.com. See the user documentation for your version of
the utility at the following URL:
http://www.cisco.com/en/US/products/ps10493/products_user_guide_list.html
To Next Page
Loading...
Need help?
General
