General Safety Warnings
Read the installation instructions before using, installing or connecting the system to the power source.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
No serviceable parts inside. To avoid risk of electric shock, do not open.
Warning
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1005—Circuit Breaker
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than:
AC:
• 20 A U.S. maximum
DC:
• 30 A U.S maximum
Warning
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Warning
This unit might have more than one power supply connection. To reduce risk of electric shock, all connections
must be removed to de-energize the unit.
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed by
skilled, instructed or qualified personnel.
Warning
Cisco Catalyst 8500 Series Edge Platforms Hardware Installation Guide
13
Preparing Your Site for Installation
General Safety Warnings
To Next Page
Loading...
Need help?
General
