EasyManuals Logo
Home>Cisco>Switch>Catalyst 3650 Series

Cisco Catalyst 3650 Series Guide

Cisco Catalyst 3650 Series
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
1-6
Catalyst 3650 Switch Hardware Installation Guide
OL-29734-01
Chapter 1 Product Overview
Front Panel
10/100/1000 Ethernet Ports
The 10/100/1000 Ethernet ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length
is 328 feet (100 meters). The 100BASE-TX and 1000BASE-T traffic requires Category 5, Category 5e,
or Category 6 unshielded twisted pair (UTP) cable. The 10BASE-T traffic can use Category 3 or
Category 4 UTP cable.
For information about the 10/100/1000 Ethernet port connections and specifications, see the
“10/100/1000 Ethernet Port Connections” section on page 2-19 and Appendix B, “Connector and Cable
Specifications.
PoE and PoE+
The PoE+ ports use the same connectors as described in the “10/100/1000 Ethernet Ports” section on
page 1-6.
These PoE+ ports provide:
Support for IEEE 802.3af-compliant powered devices (up to 15.4 W PoE per port) and support for
IEEE 802.3at-compliant powered devices (up to 30 W PoE+ per port).
Support for Cisco-enhanced PoE.
Support for prestandard Cisco powered devices.
Configurable support for Cisco intelligent power management, including enhanced power
negotiation, power reservation, and per-port power policing.
See Table 1-12 on page 1-18 for the power supply matrix that defines the available PoE and PoE+ power
per port.
Note For information on 250-W AC power supply support on the PoE-capable switch models, refer to the
Release Notes for the Cisco Catalyst 3650 Switch on Cisco.com.
Note The output of the PoE+ circuit has been evaluated as a Limited Power Source (LPS) per IEC 60950-1.
For information about power supply modules, PoE+ port connections, and PoE+ specifications, see the
“Power Supply Modules” section on page 1-17, the “PoE+ Port Connections” section on page 2-21, and
Appendix B, “Connector and Cable Specifications.
Management Ports
Ethernet management port (see the “Ethernet Management Port” section on page 1-20)
RJ-45 console port (EIA/TIA-232) (see the “RJ-45 Console Port” section on page 1-20)
USB mini-Type B console port (5-pin connector)
You can connect the switch to a host such as a Windows workstation or a terminal server through the
Ethernet management port, the RJ-45 console port, or the USB console port (USB mini-Type B port).
The USB console port connection uses a USB Type A to 5-pin mini-Type B cable. The USB console
interface speeds are the same as the RJ-45 console interface speeds.

Table of Contents

Other manuals for Cisco Catalyst 3650 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 3650 Series and is the answer not in the manual?

Cisco Catalyst 3650 Series Specifications

General IconGeneral
BrandCisco
ModelCatalyst 3650 Series
CategorySwitch
LanguageEnglish

Related product manuals