In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a
minimum of 16.14 inches (41 cm) or more from the body of all persons. Statement 332
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning
Ensure to connect the power cord of the power adapter to a socket outlet with an earthing connection.
Caution
FCC Safety Compliance Statement
The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF
electromagnetic energy emitted by FCC-certified equipment. When used with approved Cisco antennas, Cisco
Catalyst products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper
operation of this radio device according to the instructions in this publication results in user exposure
substantially below the FCC recommended limits.
Safety Precautions
For safety and to achieve a good installation, please read and follow these safety precautions:
• Select your installation site with safety as well as performance in mind. Remember: electric power lines
and phone lines look alike. For safety, assume that any overhead line can kill.
• Call your electric power company. Tell them your plans, and ask them to come to look at your proposed
installation
• Plan your installation carefully and thoroughly before you begin. Successful raising of a mast or tower
is mostly a matter of coordination. Each person should be assigned to a specific task and know what to
do and when to do it. One person should be in charge of the operation to issue instructions and watch
for signs of trouble.
• When installing the AP or its antennas, remember:
• Do not use a metal ladder.
• Do not work on a wet or windy day.
• Do dress properly—shoes with rubber soles and heels, rubber gloves, long-sleeved shirt or jacket.
• Use a rope to lift the AP. If the assembly starts to drop, get away from it and let it fall.
• If any part of the antenna system comes in contact with a power line, do not touch it or remove it yourself.
Call your local power company. They will remove it safely.
If an accident should occur, call for qualified emergency help immediately.
Cisco Catalyst IW9165D Heavy Duty Access Point Hardware Installation Guide
40
Safety Guidelines and Warnings
FCC Safety Compliance Statement
To Next Page
Loading...
Need help?
General
