Cisco CRS-1 - Carrier Routing System Router Migration Guide

1-25
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
OL-13669-03
Chapter 1 Migrating to a Cisco CRS-3 Carrier Routing System
How to Migrate to a Cisco CRS-3 Carrier Routing System (16-Slot)
The following example shows commands to Administratively Disable the Fabric Plane on the CRS-1
Fabric Card:
RP/0/RP0/CPU0:router#admin
RP/0/RP0/CPU0:router(admin)#config
RP/0/RP0/CPU0:router(admin-config)#controller fabric plane 0 shut
RP/0/RP0/CPU0:router(admin-config)#commit
RP/0/RP1/CPU0:router(admin-config)# end
RP/0/RP1/CPU0:router(admin)# show controllers fabric plane all detail
Example of the show controllers fabric plane all detail Command
Execute the show controllers fabric plane all detail command to display the status of the planes. The
following example shows a multishelf Cisco
CRS Carrier Routing System node:
RP/3/RP0/CPU0:MC-SCALE(admin)#show controllers fabric plane all detail
Fri Jan 7 17:02:44.919 PST
Flags: P - plane admin down, p - plane oper down
C - card admin down, c - card oper down
A - asic admin down, a - asic oper down
L - link port admin down, l - linkport oper down
B - bundle port admin Down, b - bundle port oper down
I - bundle admin down, i - bundle oper down
N - node admin down, n - node down
X - ctrl admin down, x - ctrl down
o - other end of link down d - data down
f - failed component downstream
m - plane multicast down, s - link port permanently shutdown
t - no barrier input O - Out-Of-Service oper down
T - topology mismatch down e - link port control only
D - plane admin data down
Plane Admin Oper up->dn up->mcast Down Total Down
Id State State counter counter Flags Bundles Bundles
-------------------------------------------------------------------------
0 DOWN DOWN 0 0 27 15
1 UP UP 0 0 27 15
2 UP UP 0 0 27 15
3 UP UP 0 0 27 15
4 UP UP 0 0 27 15
5 UP UP 0 0 27 15
6 UP UP 0 0 27 15
7 UP UP 0 0 27 15
What to Do Next
Next we disable power to the Fabric node, and verify that node is moved to Unpowered state.
Disabling Power to the CRS-1 Fabric Card
SUMMARY STEPS
1. admin
2. configure

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English