Cisco Firepower 1010 User Manual

Onboard a Device with Low-Touch Provisioning
Onboard the threat defense using low-touch provisioning and the device serial number.
Procedure
Step 1 In the CDO navigation pane, click Inventory, then click the blue plus button ( ) to Onboard a device.
Step 2 Select the FTD tile.
Step 3 Under Management Mode, be sure FTD is selected.
At any point after selecting FTD as the management mode, you can click Manage Smart License to enroll
in or modify the existing smart licenses available for your device. See Obtain Licenses, on page 122 to see
which licenses are available.
Step 4 Select Use Serial Number as the onboarding method.
Figure 43: Use Serial Number
Step 5 In the Connection area, enter the Device Serial Number and the Device Name and then click Next.
Step 6 In the Password Reset area, click the Yes, this new device has never been logged into or configured for
a manager radio button, and click Next.
Step 7 For the Policy Assignment, use the drop-down menu to choose an access control policy for the device. If you
have no policies configured, choose the Default Access Control Policy.
Step 8 For the Subscription License, check each of the feature licenses you want to enable. Click Next.
Step 9 (Optional) Add labels to your device to help sort and filter the Inventory page. Enter a label and select the
blue plus button ( ). Labels are applied to the device after it's onboarded to CDO.
What to do next
From the Inventory page, select the device you just onboarded and select any of the option listed under the
Management pane located to the right.
Deploy the Firewall With the Onboarding Wizard
This section describes how to configure the firewall for onboarding using the CDO onboarding wizard.
Cisco Firepower 1010 Getting Started Guide
132
Threat Defense Deployment with CDO
Onboard a Device with Low-Touch Provisioning

Cisco Firepower 1010 Specifications

General

Brand	Cisco
Model	Firepower 1010
Category	Firewall
Language	English