Cisco Firepower 1010 User Manual

b) From the Feature Tier drop-down list, choose Standard.
Only the Standard tier is available.
c) (Optional) Check Enable Security Plus.
The Security Plus tier enables Active/Standby failover.
Step 8 Click Apply.
Step 9 Click the Save icon in the toolbar.
Step 10 Quit ASDM and relaunch it.
When you change licenses, you need to relaunch ASDM to show updated screens.
Configure the ASA
Using ASDM, you can use wizards to configure basic and advanced features. You can also manually configure
features not included in wizards.
Procedure
Step 1 Choose Wizards > Startup Wizard, and click the Modify existing configuration radio button.
Cisco Firepower 1010 Getting Started Guide
183
ASA Deployment with ASDM
Configure the ASA

Cisco Firepower 1010 Specifications

General

Brand	Cisco
Model	Firepower 1010
Category	Firewall
Language	English