Cisco Firepower 1010 User Manual

Step 4 Click the shut down device icon ( ) in the System section.
Step 5 When prompted, confirm that you want to shut down the device.
Step 6 If you have a console connection to the firewall, monitor the system prompts as the firewall shuts down. You
will see the following prompt:
System is stopped.
It is safe to power off now.
Do you want to reboot instead? [y/N]
If you do not have a console connection, wait approximately 3 minutes to ensure the system has shut down.
Step 7 You can now unplug the power to physically remove power from the chassis if necessary.
What's Next
To continue configuring your threat defense using CDO, see the Cisco Defense Orchestrator home page.
Cisco Firepower 1010 Getting Started Guide
165
Threat Defense Deployment with CDO
What's Next

Cisco Firepower 1010 Specifications

General

Brand	Cisco
Model	Firepower 1010
Category	Firewall
Language	English