EasyManuals Logo
Home>Cisco>Switch>IE 3000

Cisco IE 3000 Hardware Installation Guide

Cisco IE 3000
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
1-2
Cisco IE 3000 Switch Hardware Installation Guide
Chapter 1 Overview
Switch Models
Switch Models
Table 1-1 describes the switch and the expansion modules. The Cisco IE-3000-4TC and
the Cisco IE-3000-8TC are the switch models, and the Cisco IEM-3000-8TM and the
Cisco IEM-3000-8FM are expansion modules that you can connect to increase the number of ports. For
instructions on how to connect the expansion modules to the switch, see the Adding Modules to the
Switch” section on page 2-5.
.
Front-Panel Description
This section describes the front panel and includes these sections:
10/100 Ports, page 1-8
Dual-Purpose Ports, page 1-8
100BASE-FX Ports, page 1-10
Power and Relay Connector, page 1-10
Console Port, page 1-11
LEDs, page 1-11
The switch front panel contains the ports, the LEDs, and the power and relay connectors. Figure 1-1 to
Figure 1-6 show the switch and expansion module front panels.
Table 1-1 Cisco IE 3000 Switch Models and Expansion Modules
Switch Model Description
Cisco IE-3000-4TC 4 10/100BASE-T Ethernet ports and 2 dual-purpose ports, each with
a 10/100/1000BASE-T copper port and an SFP (small form-factor
pluggable) module slot
Cisco IE-3000-8TC 8 10/100BASE-T Ethernet ports and 2 dual-purpose ports
Cisco IE-3000-4TC-E 4 10/100BASE-T Ethernet ports and 2 dual-purpose ports (supports
the IP services software feature set)
Cisco IE-3000-8TC-E 8 10/100BASE-T Ethernet ports and 2 dual-purpose ports (supports
the
IP services software feature set)
Expansion Modules
Cisco IEM-3000-8TM Expansion module with 8 10/100BASE-T copper Ethernet ports
Cisco IEM-3000-8FM Expansion module with 8 100BASE-FX fiber-optic Ethernet ports
Cisco IEM-3000-4SM Expansion module with 4 100BASE-X SFP Ethernet ports
Cisco IEM-3000-8SM Expansion module with 8 100BASE-X SFP Ethernet ports
Cisco IEM-3000-4PC
1
1. The IEM-3000-4PC expansion module and the IEM-3000-4PC-4TC expansion module require a separate DC power source.
This source can be either the PWR-IE65W-PC-DC DC-input power supply or the PWR-IE65W-PC-AC AC-input power suppl
or you can use site source DC power.
Expansion module with 4 PoE ports
Cisco IEM-3000-4PC-4TC Expansion module with 4 PoE ports and 4 non-PoE FE ports

Table of Contents

Other manuals for Cisco IE 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco IE 3000 and is the answer not in the manual?

Cisco IE 3000 Specifications

General IconGeneral
BrandCisco
ModelIE 3000
CategorySwitch
LanguageEnglish

Related product manuals