Cisco IE 3000 Hardware Installation Guide

Contents
v
Cisco IE 3000 Switch Hardware Installation Guide
Installing and Removing SFP Transceivers B-45
Installing SFP Transceivers into Module Ports B-46
Removing SFP Transceivers from Module Ports B-47
Connecting to SFP Transceivers B-48
Connecting to a Dual-Purpose Port B-49
Connecting to 100BASE-FX Ports B-51
Connecting to a PoE Port B-52
Connecting the Switch to the Power Converter B-52
Attaching the Power Converter to the Switch B-52
Installing the Power Converter on a DIN Rail, Wall, or Rack Adapter B-55
Connecting the DC Power Clip B-55
Connecting the Power Converter to an AC Power Source B-56
Preparing the AC Power Cord B-56
Connecting the AC Power Cord to the Power Converter B-57
Connecting the Power Converter to a DC Power Source B-59
Applying Power to the Power Converter B-61
Connecting the Switch to the AC-Input Power Supply B-61
Attaching the Power Supply to the Switch B-61
Installing the AC-input Power Supply on a DIN Rail, Wall, or Rack Adapter B-62
Connecting the DC Power Clip B-62
Connecting the AC-Input Power Supply to an AC Power Source B-63
Connecting the AC Power Cord to the Power Supply B-63
Where to Go Next B-64
APPENDIX C Cable and Connectors C-1
Connector Specifications C-1
10/100 Ports C-1
Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices C-1
Connecting to 1000BASE-T Devices C-2
100BASE-FX Ports C-3
PoE Expansion Module Ports (IEM-3000-4PC and IEM-3000-4PC-4TC Only) C-3
SFP Transceiver Ports C-4
Dual-Purpose Ports C-5
Console Port C-5
Cable and Adapter Specifications C-5
SFP Transceiver Cable Specifications C-5
Two Twisted-Pair Cable Pinouts C-8
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports C-9
Crossover Cable and Adapter Pinouts C-10

Cisco IE 3000 Specifications

General

Brand	Cisco
Model	IE 3000
Category	Switch
Language	English