Cisco IP DECT 6823 User Manual

Procedure
Step 1 Press Menu .
Step 2 Select Settings > LED signal.
Step 3 Select the LED choice.
• Green LED
• Orange LED
• Red LED
Step 4 Highlight the choice for the LED to light.
• Off: The LED will not light up.
• Missed call: The LED lights if you missed a call.
• Voice message: The LED lights if you have a voicemail message.
• Low battery: The LED lights if the handset battery is running out of power.
Step 5 Press Select to save the setting.
Set the Timer to Turn Off the Screen
You can set the handset to turn off the screen after a specific amount of time. Before the screen turns off, it
dims after a specific amount of inactivity.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Power save.
Step 3 Highlight your choice.
• 5 seconds: The screen dims after 2 seconds and turns off after 5 seconds.
• 10 seconds: The screen dims after 5 seconds and turns off after 10 seconds.
• 20 seconds: The screen dims after 5 seconds and turns off after 20 seconds.
• 30 seconds: The screen dims after 10 seconds and turns off after 30 seconds.
• 45 seconds: The screen dims after 10 seconds and turns off after 45 seconds.
• 60 seconds: The screen dims after 10 seconds and turns off after 60 seconds.
Step 4 Press Select to save the setting.
Cisco IP DECT 6800 Series User Guide
77
Settings
Set the Timer to Turn Off the Screen

Cisco IP DECT 6823 Specifications

General

Brand	Cisco
Model	IP DECT 6823
Category	Handsets
Language	English