Cisco IP DECT 6823 User Manual

• Automatic: The incoming call is automatically answered.
Step 4 Press Select to save the setting.
Allow the Handset to Ring While Charging
If you don't want the handset to ring while it is charging, you can turn off the ringer. Incoming calls continue
to display on the screen.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Silent charging.
Step 3 Highlight your choice.
• Off (default): The handset will ring while on the charger.
• Silent: The handset won't ring will on the charger.
Step 4 Press Select to save the setting.
Set Do Not Disturb
You can set the handset to not disturb you when you get an incoming calls. This is called do not disturb (DND)
mode. When you are in this mode, you see the DND icon in the screen headers. If you get a call while
DND is active, the call is sent to voicemail.
While in DND, many of the icons that display on the header are different from normal.
To use this feature, your administrator must enable DND.
Procedure
Step 1 Press Menu .
Step 2 Select Settings > Do not disturb.
Step 3 Highlight your choice.
• Disabled (default): DND mode is off.
• Enabled: DND mode is on.
Step 4 Press Select to save the setting.
Cisco IP DECT 6800 Series User Guide
81
Settings
Allow the Handset to Ring While Charging

Cisco IP DECT 6823 Specifications

General

Brand	Cisco
Model	IP DECT 6823
Category	Handsets
Language	English