SGE2010/SGE2010P Administration Guide 12
Connecting to the Switch with Telnet
Using the Console
Connecting to the Switch with Telnet
You can connect to the switch with telnet.
1. Open a command line editor and enter telnet <
switch ip address>. Then, press the Enter
key.
2. When the Log
in screen appears, select Edit and enter admin in the User Name field. Leave
the Password field blank.
3. Press the Esc
key to return to the Login screen.
4. Select Ent
er to enter the CLI interface.
NOTE: The Use
rname & Password Settings screen can also be used to set passwords for other
users.
Logging On to the Console
1. Start HyperTerminal and open the connection that you configured previously.
2. When the blinking cursor appears, press the Ent
er key.
3. When prompted to login, enter the default login and password: admi
n
The Switch Main Menu a
ppears.
Selecting Menu Options and Actions
Within the Console Interface, menus list options in numeric order. Actions appear at the end of
the screen. To select menu options and actions, use the following keys on your keyboard:
Key Function
Arrow keys Move the cursor up, down, left, or right.
Number key Press the menu number and then press Enter key to select a menu
option.
Tab Move the cursor from one field to the next on an editing screen.
Enter Select an option that is highlighted by the cursor.
Esc Return to the previous menu or screen, or move cursor from
editable fields to Action list.
To Next Page
Loading...
Need help?
General
